If you havent heard your vintage mic element throught the Terminator then you haven't heard how fat and full it can sound, especially with crystal elements. What about playing through 2 amps at once? Now you can, and still be properly terminated with no loss of tone.

Price: $99.00


The Lone Wolf Terminator is the answer for those who want to get the most out of their high impedance microphone and for those who desire a splitter with isolated outputs. This pedal is great for gigging musicians and the studio.

The Terminator is an active FET buffer and isolated splitter with a 10 meg ohm input. The 10 meg impedance is ideal for crystal microphone elements and more than adequate for controlled magnetic elements; in other words, it is perfect for your bullet microphone. Your tone will be fatter and you may find that microphones that have been put away now sound great. Good effect pedals will have a true bypass and with a true bypass you will lose the impedance match that the pedal provides causing the tone to be a little thinner, just like playing with no effect pedals at all, the Terminator will prevent this tone loss while in bypass by always providing an optimum impedance match for your microphone. The splitter function allows you to play through two amps at once or go to a PA with the second output, this feature allows for a lot of creativity and a stereo sound while performing. You can have effects with one amp while the other amp is clean, different effects with each amp or anything else you can dream up.

There is no gain in the pedal and there is no distortion. One output can be used to feed an amplifier and the second can feed either another amplifier or the LINE (or instrument) input on a PA. While the typical guitar amplifier has only a 68k ohm input impedance and the typical boutique harp amp may have a 1 meg ohm input impedance. When you use the Terminator you will have the optimum input impedance for a high impedance bullet microphone.

The pedal can be powered with a 9V battery or a DC adapter. The DC adapter requirements are a regulated 9V DC with a minimum 100mA output and a 2.1mm x 5.5mm connector with a negative center. The battery is switched OFF when an external power adapter is used, and the "IN" jack acts as the pedal ON/OFF switch. Power adapters for US and EURO customers are sold separately.


  1. 10 MEG OHM Input Impedance
  2. 2 Isolated Amplifier Outputs
  3. 9V DC input (barrel with a negative center)
  4. LED ON/OFF Indicator
  5. Reverse polarity protection
  6. 10 year warranty on parts and labor
  7. Satisfaction Guaranty, return within 60 days, undamaged, for a refund minus 4% cc fee and shipping


Average Rating
  • Average Rating 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
(5 out of 5 with 1 vote)
Great Multi-Purpose Tool
  • Rating 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
Chris Balding (FL) - November 25th 2014
I really love using my Lone Wolf Delay pedal with all of my amps. However, I noticed that my crystal mics did not sound as good while the delay was in bypass mode. The Terminator allows me to retain the full potential of my mics when my delay is bypassed. Additionally, some rooms/venues are very "boomy" and do not work well with artificial reverb, delay, etc. The sound gets too washy and lost in the mix. With the Terminator, I can still get a great tone from my amp and let the room add [...read more]